I have the i/h/e should i upgrade my cam, valve spring, retainers, and cam gear or put on a zex nos system or should i do something else?

 

The biggest upgrade will be the NOS kit it will probably provide you with the most bang for buck performance.

 

Do i need to upgrade anything else or can i get a system and use a 75 shot.

 

u dont need anyhting to run 75 shot but thats max, and i would get some tuning done with the nitro. other wise run 50 shot

 

More fuel is a good thing.

http://www.dseries.org

 

go junkyard turbo setup. goto http://www.homemadeturbo.com u can put a good kit together for like 500

 

i would gt a nos kit. but imo nos or nx is the way to go. zex kinda sux. but hey do whateva you want. but get it tunned.

 

d-series motors dont really react well to bolt-ons. whatever you get you are going to flip out. my friend felt more from cutting an a/c belt than he did from a DC 4-2-1 header.

 

Slap a turbo on it and call it good. You won't notice much of anything with a cam, or pulley set on that motor. Trust me, I have that motor.

 

I have a d16z6 motor in my 95 civic ex sedan i have a dc 4-2-1 header, ractive cbi, straightpiped through the cat, a aem cai, front mid and rear braces and my car moves for a 4 door.

 

No it doesn't. I own one. It won't move until you feed it like 8 psi. Without at least a cam, springs, high comp pistons, and rods that engine is slow without boost. Sorry. I have done everything possible to mine and nothing makes it fast besides boost.

 

I would buy the bullfrog set up... Throttle body, head assembly with the larger cam, and computer.

 

if you want to go NA get the head package like what exsopeed offers
cams and head package should be done all in one shot if you can afford it.

 

n/a on a sohc IMO is worthless and will leave your pockets empty!! you can only do so much to it before you reach it's limits. and even after that, you still won't be as fast as someone with a dohc swap eg. if you're gonna stick with that motor, i'd place my wallet on the nitrous or turbo.

 

Glad to hear that some one else wants to do some things to their sohc honda. I have a few questions of my own as to who sells cams for sohc motors, as well as headers that don't cost an arm and a leg. does any one use pacesetter exauhst, and if some one does how is it holding up.

 

chikara header kicks *** but i got a new dc for 150 so i bought it instead

 

many people sell cams for the sohc
exospeed
crower
crane
JG (i think)
gude
ef1.com

 

I was thinking of crower cams. But i think i'm going to save up my money for a drag 3 turbo kit or a greddy one.