VTEC pressure valve????
Thread Starter
Joined: May 2003
Posts: 111
Likes: 0
From: fl
HELP-----VTEC pressure valve????
heres the deal my brothers VTEC will not engage at all, this all coming after switching to K-series oil filter and we went to autozone and got the code -po 1 22-
some said its the VTEC pressure valve and my local shop said its the TPS.........
some said its the VTEC pressure valve and my local shop said its the TPS.........
Honda-Tech Member
Joined: Oct 2003
Posts: 2,398
Likes: 0
From: Honolulu, HI
Re: (1ntensiveVTECivic)
That's your Vtec oil pressure sensor going out. I had the same problem with my B16 head. You have two options:
1. Replace the sensor (if you're sure it's not working anymore.
2. Just ground out the oil pressure sensor wire. I did this my CEL code for it went away. It's easy and free, but just make sure you always have enough oil in your motor.
1. Replace the sensor (if you're sure it's not working anymore.
2. Just ground out the oil pressure sensor wire. I did this my CEL code for it went away. It's easy and free, but just make sure you always have enough oil in your motor.
Thread
Thread Starter
Forum
Replies
Last Post
BobGnarly
Acura Integra
4
May 23, 2004 05:28 PM
