I'm having trouble with my vafc. I can't seem to change the vtec engagement on my car. If I set it to whatever engagement point it still always engages at 5400. I checked all the wires and they all seem to be fine and still connected. Any kind of help would be find. Also I have a 98 ex d16y8 if that will help.


[Modified by KENetics1, 1:25 AM 3/8/2003]

 

i had the same problem on a d16z6. iv done alot of searching on the problem and cant find a cure... some people say to run a new wire from the selinod to the vafc but i havent tried yet

 

check the in and out. make sure they are all set on 8

 

Thanks, i checked and my in and out, it was at 6 so I changed them to 8. I didn't get to drive the car yet, to much snow, so I don't know if that fixed the problem. Thanks for the help though. Peace

 

it's the line to the vtec solenoid, check it. and if that isnt it, check if there is any gunk or anything in there.