My brother has recently started having some grinding issues in his tranny. I was wondering how difficult is it to replace the synchros in a d series tranny and if its even worth it. I wish i would have saved my Y8 tranny from my swap but its too late for that. I think it might be time to look for a new tranny but if its not too big of a job we will just rebuild the one he has.


Modified by b18bEKcoupe at 7:34 PM 9/19/2005


Modified by b18bEKcoupe at 7:35 PM 9/19/2005

 

BUMP

 

How old is the clutch? sometimes when the clutch gets old it doesnt want to release all the way and causes a grind. I would also try some syncromesh trans fluid also. It fixed my buddies 3rd gear grind in his teg.

 

also check this post
http://www.d-series.org/forums...19200


rebuild run $700+
used trannys depending run $150 - $400

 

I had the same issues and it turned out to be a bad clutch.
Is it one gear in perticular or all of them?

 

d series trannys are cheap try to get a d16z6 tranny shorter gears