*****Does anybody know if I can take an entire gearset(gears, synchros, shafts, etc.) and drop them into my zc case without modification?*****

Well this weekend I pulled the tranny and replaced the input shaft bearing. After I put the tranny back together, i could not get it to come out of reverse. So I took the case back off and put it in nuetral and put it back together but left the bolts a little loose and check to see if I had all my gears before I torqued it down. I had all gears. So I torque tha bolts and check the gears one more time and now Im locked out of reverse. I have 1-5 but no reverse. When the case is off I can get all gears, but reverse seems a bit difficult. It seems like something is binding and I traced all the linkages and cant find a problem. I was just wondering If anyone had run into this before. Help greatly appreciated.


Modified by Riceboy891 at 2:17 PM 10/31/2008

 

By the way this is on a ZC tranny.

 

Bump to get my hatch back on the road