Are these the correct pistons for my setup?
Thread Starter
Honda-Tech Member
Joined: Nov 2005
Posts: 1,458
Likes: 0
Are these the correct pistons for my setup?
I recently bought a block, pistons, and rods from a member here on HT. Everything he told me seems to be legit, but I have questions about the pistons.
The setup in the end will be a b18c1 head, this block that i'll list below, and a gt35 @ about 25 psi... hoping for 550 wheel horse.
Anyway the block is a Darton sleeved 85 mm b18a1. I got it, with Crower Billet steel LS Rods, and JE 85 mm pistons. The part # on the pistons is 185918 and the box says B16a3. I know the size is rigth on them, I just dont know if the rod length of the LS rods is right, and if they will work with the LS rods, LS crank, and b18c1 head?
The setup in the end will be a b18c1 head, this block that i'll list below, and a gt35 @ about 25 psi... hoping for 550 wheel horse.
Anyway the block is a Darton sleeved 85 mm b18a1. I got it, with Crower Billet steel LS Rods, and JE 85 mm pistons. The part # on the pistons is 185918 and the box says B16a3. I know the size is rigth on them, I just dont know if the rod length of the LS rods is right, and if they will work with the LS rods, LS crank, and b18c1 head?
Thread
Thread Starter
Forum
Replies
Last Post