Tempature problems on Si B16a
I'm having problems with the tempature reading on my car. I not sure if it's the themostat though, since I don't know much about mechanical issues yet. The tempature has random rushes that make it go about 3/4's of the way then drops back down to normal. What would be the sympthoms? Or what else could be the problem if its not the thermostat?
look at the thermostat under the throttle body and check if the ground is bolted down.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by egsleepercivic »</TD></TR><TR><TD CLASS="quote">try bleeding the cooling system there should be a bleeder valve by the thermostat</TD></TR></TABLE>
check if your coolant is topped off, turn on the heater
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by egsleepercivic »</TD></TR><TR><TD CLASS="quote">try bleeding the cooling system there should be a bleeder valve by the thermostat</TD></TR></TABLE>check if your coolant is topped off, turn on the heater
Thread
Thread Starter
Forum
Replies
Last Post
B16AJDM
Honda Civic / Del Sol (1992 - 2000)
16
May 22, 2009 12:00 PM



