TDC code? and dumb timing question
Thread Starter
Joined: Mar 2004
Posts: 16
Likes: 0
TDC code? and dumb timing question
I'm stumped, I've got my new built H22 in and running after 2yrs of getting all the goodies togeather and I've taken care of all the CEL's except one, a CEL for the TDC sensor and I believe that's why the vtec won't engage?
My dizzy is new and I have yet to follow the wire from the sensor to the ECU.(Which wire is it?)
Also when setting timing do you want to see the white mark or a numbered mark with the gun set at 16deg? or do you set the gun to 0deg and look for a numbered mark?
some details...H22 sleeved and forged 8.5:1, str intake and t.b.(both a pain in the ***), P28 on Hondata s200bd, external coil type dizzy
Modified by MaK at 4:22 PM 8/31/2004
My dizzy is new and I have yet to follow the wire from the sensor to the ECU.(Which wire is it?)
Also when setting timing do you want to see the white mark or a numbered mark with the gun set at 16deg? or do you set the gun to 0deg and look for a numbered mark?
some details...H22 sleeved and forged 8.5:1, str intake and t.b.(both a pain in the ***), P28 on Hondata s200bd, external coil type dizzy
Modified by MaK at 4:22 PM 8/31/2004
Thread
Thread Starter
Forum
Replies
Last Post
