i just bought a 'super high technology' tach on ebay for $50 and the wiring is different from tachs that a couple of people i know got. i was wondering if anyone knows exactly how to hook these wires up. below is a description of the wiring. any help would be great. thanks.


-wires coming directly off the tach are green, red, and black wires and there is also a set of five wires of which 4 of them are gray and 1 is yellow and the end is a wiring harness

then theres a black box (inverter?) that has a white wire, black wire, and red wire along with the wire set with the 4 grays and the 1 yellow hooked with a harness at the end. now obviously i know that the harnesses plug into each other and im pretty sure i know how everything hooks up except for the white wire. but just in case, if anyone does know about this install, let me know in full detail. thanks.

 

Do you have pics of the harness? How about a wiring diagram?

 

below is a link to my homepage where there is a link to the tach installation / diagram and hopefully all the information you need to be able to help me out. thanks again for helpin any.


Link to my homepage:
http://confused15694200.tripod.com/

Link directly to tach info page:
http://confused15694200.tripod....html