What are the steps to performing a port and polish on a vehical?


Modified by Hebrew-Hammer at 9:43 PM 11/9/2004

 

1. Remove head, clean off very well
2. Send to reputable head shop
3. Get head back and bolt on

It's really not something that just anyone can do. Most of the time the ports are too big as it is. Without a flow bench, there's no telling what you're accomplishing. There are people who will say they or someone they knew did it and make 230 whp, but the best way is to let someone who's seen many many heads and tried many different designs use their skill and knowledge.

Ask yourself why you want the ports bigger and smoother...