i just got done installing my shift light in my 95 integ ls made sure i was getting power and was grounded with the right size wires and spliced into the back of my cluster into the blu with silver dots colored wire. I set the light to go off at 4000 rpm and when i reved up to 4000 rpm it did not go off!

help appreciated

 

Mm I don't know much about this but I think you'll need to be a bit more specific like what kind it was?

 

There are a couple of blue wires on the cluster. The one you want is the blue wire coming off the distributor. Best bet is to run to it to make sure your getting the correct wire.