Which rods bearing do you guy recommend for a turbo built aiming at 700hp.

rods are crower and the crank is an eagle crank(factory stroke).

 

bump........

Dam wtf nobody could comment nothing ****......
I know ppl here know there **** so whats going on.
jesus criss what those someone have to do alround here to get some attention.

 

oem honda bearings

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ekb16 &raquo;</TD></TR><TR><TD CLASS="quote">oem honda bearings</TD></TR></TABLE>

Thank you sir.

 

please what bearings are ppl using on there builts.

 

bump..........................................

 

why not do the reSEARCH and find out whats everyone using. Just because I'm using oem bearings doesn't mean you should. You have an aftermarket crank and rods. The color code is thrown out the window now..however with precision measurement tools u can figure out which ones u can use. ACL and Honda are the common ones used here.

 

before deciding on bearings i would sell the eagle crank and opt for a oem issued piece...