Redoing Head internals - should i do it myself
Thread Starter
Joined: Nov 2002
Posts: 326
Likes: 0
From: Oakville, ON, Canada
Redoing Head internals - should i do it myself
Hey,
curious to hear peoples opinions of taking the head of and redoing everything. valves, springs, retainers. Is this a doable weekend project? what tools would I need to do the vavles and springs?
thanks in advance.
YV
curious to hear peoples opinions of taking the head of and redoing everything. valves, springs, retainers. Is this a doable weekend project? what tools would I need to do the vavles and springs?
thanks in advance.
YV
Honda-Tech Member
Joined: Aug 2002
Posts: 1,950
Likes: 0
From: Australia
Re: Redoing Head internals - should i do it myself (youngvedder)
I think it would definitely be a do-able project as long as you are somewhat tech saavy and take your time.
As far as tools I will let someone else answer that. I'm sure you need whatever tools are required to install and seat the valves/springs, and to measure them to make sure they're at the right tolerances, not to mention a torque wrench for the re-install.
As far as tools I will let someone else answer that. I'm sure you need whatever tools are required to install and seat the valves/springs, and to measure them to make sure they're at the right tolerances, not to mention a torque wrench for the re-install.
Member
Joined: Oct 2002
Posts: 3,279
Likes: 0
From: Secret Tweaker Pad
Re: Redoing Head internals - should i do it myself (youngvedder)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by youngvedder »</TD></TR><TR><TD CLASS="quote">thanks...
curious on the tools I require to complete...
YV</TD></TR></TABLE>
https://honda-tech.com/zerothread?id=474849
Here is a good guide for you
curious on the tools I require to complete...
YV</TD></TR></TABLE>
https://honda-tech.com/zerothread?id=474849
Here is a good guide for you
Member
Joined: Oct 2002
Posts: 3,279
Likes: 0
From: Secret Tweaker Pad
Re: Redoing Head internals - should i do it myself (youngvedder)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by youngvedder »</TD></TR><TR><TD CLASS="quote">perfect...this looks great.
YV </TD></TR></TABLE>
If you have really a good general knowledge of cars this should be no problem for you. Good luck
YV
</TD></TR></TABLE>If you have really a good general knowledge of cars this should be no problem for you. Good luck
Thread
Thread Starter
Forum
Replies
Last Post
Mike@K-Tuned
All Motor / Naturally Aspirated
17
Nov 19, 2006 01:00 PM
HavokB18
Honda Civic / Del Sol (1992 - 2000)
2
Nov 25, 2003 12:21 PM