Recommend Camshaft for Lsv turbo?
#1
Recommend Camshaft for Lsv turbo?
What camshafts do you guys recommend for me to use ? I currently have B16B Type r but i want to go a little bigger. I was thinking Bc stage 2
Here is my setup of that helps . Whp goal -550
Current set up
-aries 10:5 pistons
-eagle rods
-King race bearing
-Super tech duel valve springs
-ferra flat face valves
-Elderbrock intake
-70mm Sk2 throttle body
-Twin disc Clutch
-precision 6868
Here is my setup of that helps . Whp goal -550
Current set up
-aries 10:5 pistons
-eagle rods
-King race bearing
-Super tech duel valve springs
-ferra flat face valves
-Elderbrock intake
-70mm Sk2 throttle body
-Twin disc Clutch
-precision 6868
Last edited by Boosted-CRX; 12-17-2016 at 05:13 PM. Reason: Additional info
#3
#4
Re: Recommend Camshaft for Lsv turbo?
its also not that big of a housing so i dont think ot will be to bad of a spool
#6
Honda-Tech Member
Re: Recommend Camshaft for Lsv turbo?
I am not sure why TheShodan doesn't like the Crower's or BC's... I have certainly have had success with them in the past. The biggest improvements I have ever seen in a 500 HP "B" series engine were 62 wheel HP using a set of Skunk2 Pro1+'s over the stock B16A cams. The bad news: My personal experience with Skunk2 Pro series camshafts with respect to longevity has been far less than ideal. Even if they made slightly less power, I would run BC's or Crowers.
#7
Moderator
iTrader: (14)
Re: Recommend Camshaft for Lsv turbo?
I am not sure why TheShodan doesn't like the Crower's or BC's... I have certainly have had success with them in the past. The biggest improvements I have ever seen in a 500 HP "B" series engine were 62 wheel HP using a set of Skunk2 Pro1+'s over the stock B16A cams. The bad news: My personal experience with Skunk2 Pro series camshafts with respect to longevity has been far less than ideal. Even if they made slightly less power, I would run BC's or Crowers.
And I'm sorry, but have had nothing but good success with skunk camshaft since 2001.
Different strokes for different folks.
Last edited by TheShodan; 12-18-2016 at 10:31 PM.
Trending Topics
#8
Honda-Tech Member
Re: Recommend Camshaft for Lsv turbo?
No, get it correct, please. I love CROWER camshafts. It's the Brian Crower that is complete garbage from my expertise and experience. None of the BC's EVER..AND I MEAN NEVER perform as expected, use their directed specs (which are never as claimed) or anything else..
And I'm sorry, but have had nothing but good success with skunk camshaft since 2001.
Different strokes for different folks.
And I'm sorry, but have had nothing but good success with skunk camshaft since 2001.
Different strokes for different folks.
I do find it interesting that experiences for seasoned individuals are so dramatically different.
#10
Honda-Tech Member
Thread
Thread Starter
Forum
Replies
Last Post
jk11blueboi
Forced Induction
2
05-12-2007 08:28 PM