i installed my hondata on my 99 civic ex with an 00 b16 swap. we put the chip into the p28 comp hooked up the hondata and all it does is blinck the light. i heard that if the light does not stay on solid then the hondata has not yet connected to the computer. What would cause this. tried other p28's, interface boxes, and even jumper harnesses. the hondata is a stage 2 with boost option

 

come on someone gots to know this

 

ttt

 

darren why dont you call wunk?

 

still having problem! where are all the hondata gurus

 

Here is a part from the S200 Installation manual, which you can download from hondata. Here is the link: http://www.hondata.com/downloads.html

The interface box LED is flashing slowly

The problem lies with the Hondata interface box not being able to communicate with the ECU. Possible causes for this problem:

• Incorrect ROM used for the ECU.
• ROM inserted the wrong way around.

 

Or maybe there's no program on the chip????

 

does the rom lay dependent on the system? ie, stage 2 needs a stage two chip and cannot use a hondata chip?

 

Who programmed the chip with a base map?

They do not ship from Hondata with a base map burned into them. THis is done by your dealer.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Spunkster &raquo;</TD></TR><TR><TD CLASS="quote">Who programmed the chip with a base map?

They do not ship from Hondata with a base map burned into them. THis is done by your dealer.</TD></TR></TABLE>

 

i had a tuner burn the chip, then we found this problem, burned another still did not work, we bashed minds trying to figure this out

 

are the chips the same from the s200 and the stage two, we burned the stage 2 base map but no luck

 

make sure tha jumper j12 has not been cut when used with a staged system