Ok so here is the deal. i picked up a harness and followed the directions from this link: https://honda-tech.com/zerothread?id=2337026

After installing everything here is what is happening.
situation 1:
only things hooked up is the door locks and power mirrors. things work great. but sometimes the door locks lock stick shut after a couple of minutes of having the doors locked after driving.

situation 2:
door locks and mirrors work fine but as soon as i plug in the driver/pass window switches. door locks and mirrors stop working and it also makes my aftermarket lighted guages shut off. once i disconnect the window switches and pull the power fuse(big black 4 prong) and plug it back in, the mirrors and locks work again. i hate electrical and have tried new ground locations, check the harness, main plugs front and back of the fues panel and nothing was loose. im at a loss.

the door panels and switches im using are jdm. other than that everything is usdm. any help would greatly be appreciated. im about to yank all this crap out and go back to manual.

 

NE 1

 

uppers