piston to deck hieght?
#1
Junior Member
Thread Starter
Join Date: May 2003
Location: Sicklerville, N.J., USA
Posts: 495
Likes: 0
Received 0 Likes
on
0 Posts
piston to deck hieght?
i need to change deck to piston hieght to oem zc.? i need to change it to drop my compression. i have a d16z6 with pm7 pistons goinng in
Modified by Honda Crx at 8:01 AM 11/3/2005
Modified by Honda Crx at 8:01 AM 11/3/2005
#3
Will you make something up for me please?
Join Date: Sep 2001
Location: SoCal
Posts: 6,155
Likes: 0
Received 0 Likes
on
0 Posts
Re: piston to deck hieght? (Honda Crx)
So what are you asking? Can you throw in a thicker head gasket?
EDIT: I just saw your other thread. Piston to deck height is basically the distance from the piston at TDC to the top of the "deck" or block. Compression ratio is basically measured using this as a reference...kinda. The volume of the combustion chamber while the piston is at BDC versus the volume while the piston is at TDC. The closer it is to the "deck", then the compression will be higher.
EDIT: I just saw your other thread. Piston to deck height is basically the distance from the piston at TDC to the top of the "deck" or block. Compression ratio is basically measured using this as a reference...kinda. The volume of the combustion chamber while the piston is at BDC versus the volume while the piston is at TDC. The closer it is to the "deck", then the compression will be higher.
Thread
Thread Starter
Forum
Replies
Last Post