Odd idle problems.
Thread Starter
Trial User
Joined: Jan 2000
Posts: 8
Likes: 0
From: Napa, CA
Odd idle problems.
Yes. yet another idle prob.
B16A
I/H/E
CTR cams, skunk2 cam gears
Mugen ECU
Very erratic idle, when I put in the clutch the tach needle will dip almost to 0, then "catch itself" and bump back up to around 900, then settle down to around 600. (make sense?) The idle screw is all the way in, and it didn't effect the idle at all, I'm thinking my timing belt is off a tooth. Any ideas?
B16A
I/H/E
CTR cams, skunk2 cam gears
Mugen ECU
Very erratic idle, when I put in the clutch the tach needle will dip almost to 0, then "catch itself" and bump back up to around 900, then settle down to around 600. (make sense?) The idle screw is all the way in, and it didn't effect the idle at all, I'm thinking my timing belt is off a tooth. Any ideas?
Joined: Feb 2003
Posts: 28
Likes: 0
From: fort mill, sc, usa
Re: Odd idle problems. (****)
i have a pos isuzu truck that does the same thing check the exhaust gasket and make sure that is alright .
mine was that because it was gettign toomuch air it wanted t okill it
don't know if that is your problem but hey
mine was that because it was gettign toomuch air it wanted t okill it
don't know if that is your problem but hey
Thread
Thread Starter
Forum
Replies
Last Post