OK, I have an obd1 distributor here with 7 wires and these colors:

White
Peach/Blue
Peach
Yellow/Green
White/Blue
Blue
Blue/Yellow


What I want to know is what color is supposed to go to what pinout on the obd1 ecu.

Youd think this is easy to find but I have yet to find a diagram showing this information. All they say is "connect this wire to this color", with no solid evidence as to where the wire is actually going. My cars engine harness is hacked up, and half the colors dont match TIA

 

Here's what they were on my '95 GSR...

ECU - color - description
A21 - yellow/green - ignition signal to ignitor
B11 - orange - CYP sensor "P" signal (shielded wire)
B12 - white - CYP sensor "M"
B13 - orange/blue - TDC P (shielded)
B14 - white/blue - TDC M
B15 - blue/green - CKP P (shielded)
B16 - blue/yellow - CKP M

It didn't have a blue wire, maybe yours is really blue/green. Or maybe not ALL OBD-1 are exactly the same??

 

Awesome I will check continuity at the pinouts tomorrow. Thank you!