I have an obd1 distributor obd1 ecu and the wiring harness from blown90hatch..i have a 1991 integra and i got a distributor from same car as mine just the 92 and the wires r a diffent color than that of my original distributor..how can i wire color for color like im told (excluding the white wires) i cant!! please help..thanks guys

 

obd0 distributor blue blk/ylw---White Bl/wt blue wt/bl white wt/bl and an orangish wire (coroded cant tell)
obd1 distributor blue blk/ylw---white wt/blue yellow ylw/blue blue blue/yellow

 

i looked into this b4 and i swear i came across a color chart but i cant find it again..if n e one can help please do

 

Go to the source. I think some of your OBD0 colors are incorrect. Please check again to confirm that you have some orange wires.....you probably have them listed as white becuase they are faded. Either way, please PM me with the colors or email me and I will take care of you like always.

 

ya they were pretty corroded faded and caked on with dirt..a lot of them looked the same color cause they were so worn. ill definately check again.

 

to make life easier would this work for me? http://locashracing.com/store/...id=57
i dont see y not, but may as well ask b4 i blow a few bucks..

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DMax013 &raquo;</TD></TR><TR><TD CLASS="quote">to make life easier would this work for me? http://locashracing.com/store/...id=57
i dont see y not, but may as well ask b4 i blow a few bucks..</TD></TR></TABLE>

No that will not work with my harnesses. I do sell the distributor jumpers and have them in stock and will make it a plug/play affair. PM me for more details.

Jason
http://www.JKobd.com