obd0 - obd1 brake switch wire

Reply Subscribe

Thread Tools

Search this Thread

Jan 12, 2005 | 02:33 AM

dave_ed9

Thread Starter

Honda-Tech Member

Joined: Jul 2004

Posts: 84

Likes: 0

obd0 - obd1 brake switch wire

I have a '88 CRX (obd0) and I've just made my own conversion harness to run a JDM P72 (obd1) ecu with my new B18C..
My problem is that D2(obd1 side) is brake switch, but C10(obd0 side) is empty.
What will happen if I don't connect this wire to anything?

Jan 12, 2005 | 03:22 PM

dave_ed9

Thread Starter

Honda-Tech Member

Joined: Jul 2004

Posts: 84

Likes: 0

bump

Jan 12, 2005 | 03:48 PM

havok hybrid

Honda-Tech Member

Joined: Aug 2002

Posts: 929

Likes: 0

Re: (dave_ed9)

you should be fine without it... the brake switch is for the ABS or something like that .. not the motor... I could be wrong... but i did my own obd 0 to 1 and i dont remember nor have a problem ...

hope it helps