Im thinking of buying a set of airmass headers from a friend.They're of a 98 civic ex and I have a 98 civic lx.On the headers there is an o2 esensor hole at the bottom.On my stock manifold its up at the top and one below the cat.Will these fit my civic and is there a wy to relocate the sensor?TIA for the help

 

If you cut the loom off of the wiring harness, you should be able to pull the O2 sensor wires to the proper location. Then reloom the harness.

 

he has 2 o2 sensors. read before you post it sounds like it will not work unless you modify the harness and make it read only one of the sensors

 

is there a way to do that and make it work?the one sensor and two harness setup.