NOS Kit HELP!!
Thread Starter
Joined: Sep 2003
Posts: 9
Likes: 0
From: White River Jct., VT, USA
NOS Kit HELP!!
I am installing ym nitrous kit and ran into some problems! I need to find what someone called the "inertia switch". This switch disables all the fuel pressure in the lines so that I can install the Fuel Pressure Safety Switch. Does anyone know where this "inertia switch" is? I have a 92-95 civic hatchback........HELP ME PLEASE
Joined: Nov 2003
Posts: 335
Likes: 0
From: ca, USA
Re: NOS Kit HELP!! (jdmcivhatch)
Dont worry about that, its roll over protection on fords. Hondas do it differently. You dont need to touch it at all.
Just loosen the banjo fitting at the fuel filter. Put a rag around it so when it opens the fuel doesnt spray. Some new crush washers, and why not a filter while your there, would be a good idea. Put the switch on the banjo bolt and put it back together. Check for leaks and dont smoke.
Just loosen the banjo fitting at the fuel filter. Put a rag around it so when it opens the fuel doesnt spray. Some new crush washers, and why not a filter while your there, would be a good idea. Put the switch on the banjo bolt and put it back together. Check for leaks and dont smoke.
Thread
Thread Starter
Forum
Replies
Last Post
Gant
Honda CRX / EF Civic (1988 - 1991)
3
Jan 7, 2005 06:17 PM
Chris_
For Sale
12
May 15, 2003 10:44 PM
Project92Hatch
Forced Induction
4
Apr 21, 2003 08:39 PM