Tech / Misc Tech topics that don't seem to go elsewhere.
Sponsored by:
Sponsored by:

need help code 7 throttle angle position

Thread Tools
 
Search this Thread
 
Old Sep 20, 2012 | 10:08 AM
  #1  
StrokeDC2's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Dec 2005
Posts: 174
Likes: 0
From: Inya, CA USA
Default need help code 7 throttle angle position

im throwing a code 7 even after swaping out to a new tps, calibrated it correctly numerous times, trying to balance everything that has to do with the throttle body to iacv to bleeding coolant lines to anything i think would help but no...never goes away. Omg ive never stressed so much before on my car like this lol someone please help, im usually able to always fix my problems but this one is tricky.

https://honda-tech.com/forums/acura-integra-6/after-hitting-pothole-dip-rpm-drops-3089423/
Reply
Old Sep 20, 2012 | 04:19 PM
  #2  
10psiLsEf2's Avatar
Honda-Tech Member
 
Joined: Apr 2011
Posts: 1,197
Likes: 0
From: Near Pacific Coast Highway
Default Re: need help code 7 throttle angle position

OK.
let me just ask a few questions.


can you even drive the car?
does it idle like ****?


if it idles like **** its a possibility that you may have crossed the map and tps sensor plugs. they are identical but different wires....

.5 closed 4.5 wot.

maybe its a faulty tps sensor but i cant help you much more since you didnt tell us if its running,not running,running like crap, etc.
Reply
Old Sep 20, 2012 | 04:22 PM
  #3  
10psiLsEf2's Avatar
Honda-Tech Member
 
Joined: Apr 2011
Posts: 1,197
Likes: 0
From: Near Pacific Coast Highway
Default Re: need help code 7 throttle angle position

im sorry now that i actually saw and read the link.


uhmmm check for the connector make sure it snaps in on the sensor


look at the wires and make sure they are all snug, also look at the side of the connector and make sure that all the wires are showing. on the side of the connector thats the female side..

luck
Reply
Old Sep 20, 2012 | 05:50 PM
  #4  
hybridmiklo's Avatar
Honda-Tech Member
 
Joined: Feb 2005
Posts: 2,002
Likes: 0
From: Riverside
Default Re: need help code 7 throttle angle position

How bout you go about this the right way. Check that there is 5volt reference and check that there is a good ground.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Pinarr
Honda Prelude
2
May 18, 2012 08:36 AM
ScottEK
Hybrid / Engine Swaps
6
Jun 12, 2006 06:02 AM
TegLove
Acura Integra
2
Apr 23, 2004 11:24 AM
DRKSol
Honda Civic / Del Sol (1992 - 2000)
3
Apr 5, 2004 03:32 PM
RABBIT9
Tech / Misc
2
Jan 9, 2003 05:45 AM




All times are GMT -8. The time now is 11:27 AM.