LS vtec turbo piston compression ration?
Thread Starter
Joined: Apr 2003
Posts: 269
Likes: 0
From: Outside Scranton, PA, USA
LS vtec turbo piston compression ratio?
I was wondering what the best compression ration would be for an LS vtec turbo application. The block is a non-vtec B18B1 with a GSR head. The turbo is a t/3 with .42 / .48. How high of a ration can you run on pump gas? And how hight would you want it - with the turbo. Thanks
[Modified by x2gold, 6:48 PM 4/8/2003]
[Modified by x2gold, 6:49 PM 4/8/2003]
[Modified by x2gold, 6:48 PM 4/8/2003]
[Modified by x2gold, 6:49 PM 4/8/2003]
Thread Starter
Joined: Apr 2003
Posts: 269
Likes: 0
From: Outside Scranton, PA, USA
Re: LS vtec turbo piston compression ratio? (hybridvteceg)
JE forged recommended ? Would running something lower than 9.0 allow me to put more air into the cylinders and help the turbo at higher boost levels - assuming the exhuast is opened to accomodate. Thanks again.
Thread
Thread Starter
Forum
Replies
Last Post
the.hamburglar
Forced Induction
17
May 25, 2006 10:52 AM
