ls vtec nitrous help

Reply Subscribe

Thread Tools

Search this Thread

Jan 10, 2008 | 04:27 PM

prhatch124

Thread Starter

Junior Member

Joined: Dec 2007

Posts: 26

Likes: 0

From: a local hotel, ma

ls vtec nitrous help

i was wonderin if i can go with nitrous with this setup i know i have to get it tune but some pep say thatz to high of compression to go with nitrous

JDM B16 SIR II head
new valve guides
new seals
Crower.5mm oversized valves
Skunk2 Ti retainers
Skunk2 springs
3 angle valve job
GE headgasket
blox intake maniflod
70mm bbk tb
new gaskets
b.crower stage 2 cams

95 LS block
bored .20
wiseco 12:1 pistons
Eagle rods
GE block guard
ACL bearings
ARP headstuds
ARP rod studs
ITR oil pump
ITR water pump
ITR timing belt

Jan 11, 2008 | 10:45 PM

b.series

Junior Member

Joined: Dec 2007

Posts: 79

Likes: 0

From: NOVA, va

Re: ls vtec nitrous help (prhatch124)

yes u can but on race gas only. and i recommend u get a direct port kit. nitrous loves compression

Jan 12, 2008 | 11:12 PM

prhatch124

Thread Starter

Junior Member

Joined: Dec 2007

Posts: 26

Likes: 0

From: a local hotel, ma

Re: ls vtec nitrous help (b.series)

thankz

Jan 13, 2008 | 12:31 PM

nitrousballa

Junior Member

Joined: Dec 2007

Posts: 532

Likes: 0

From: gangsta, hillbilly, umerica

Re: ls vtec nitrous help (b.series)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by b.series »</TD></TR><TR><TD CLASS="quote">yes u can but on race gas only. and i recommend u get a direct port kit. nitrous loves compression</TD></TR></TABLE>

NITROUS CREATES THE COMPRESSION......flat tops are the base of a nitrous
motor if you want to make alot of power.nitrous also does not like restrictions either.there are plenty of nitrous threads on here so feel free
to indulge.