Statistics - 2.stf : 0:00 to 3:32.927
Channel Min Time at Min Maximum Time at Max Average
Accel Fuel 0 0:00 2700 0:52.26 27.357
Air Temp 32 3:32.92 125.6 1:18.6 118.44
Boost WG Out 0 0:00 0 0:00 0
Coolant Temp 32 3:32.92 194 0:24.1 186.83
Engine Load -12.987 2:55.34 7.4427 2:36.28 -7.4564
Engine Speed 907.81 3:28.78 7386.7 2:30.88 3655.4
Fuel Inj #01 Pulse 615 2:55.14 12130 2:29.24 3073.1
Fuel Trim (Accel) 0 0:00 2700 0:52.26 27.357
Idle Learned Value -4.2969 0:04.06 0 0:16.64 -0.29942
Ign Timing -17 3:32.92 34.68 0:51.66 29.173
Knock #1 Volts 0 3:32.92 4.4727 0:51.28 0.26938
Knock #2 Volts 0 3:32.92 0.019531 0:00 0.019529
O2 #1 7.32 3:32.92 12.181 0:18.38 10.688
O2 #1 FB Value 0 0:00 0 0:00 0
O2 #2 7.32 3:32.92 8.4638 0:00 8.4629
Stat Cranking 0 0:00 0 0:00 0
Stat Running 1 0:00 1 0:00 1
Stat Sync'd 1 0:00 1 0:00 1
Status #1 52 0:25.52 244 0:00 197.79
Throttle 0 0:58.9 89.377 2:42.84 15.631
Vehicle Speed 0 0:00 109.6 2:44.74 57.389

 

That factory knock sensor is useless.

 

who makes a good aftermarket knock sensor?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 9341civic &raquo;</TD></TR><TR><TD CLASS="quote">who makes a good aftermarket knock sensor?</TD></TR></TABLE>
w3rd.

 

^

 

^

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mtber &raquo;</TD></TR><TR><TD CLASS="quote">That factory knock sensor is useless.</TD></TR></TABLE>no it's not....it's actually pretty buff...if you have the right tools to use it properly....

the Apexi Power FC's knock meter, even the one on the lil' commander is very high resolution, making use is a range of 0-200 using the stock knock sensor and has helped many a user/ tuner.

 

OEM sensor is fine (as astated) it's just the stock ecu is not as...acurate or agresively monitored as the aftermarket set ups, because it is just there if you doof and put crap gas in, it will attempt to compensate to prevent immediate severe engine damage. J&S knockgaurd used to be one of the better stand alone knock sytems.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by devnull &raquo;</TD></TR><TR><TD CLASS="quote">

The factory knock sensor works great and is very useful esp. when calibrated correctly. Check out the aem forums, you can make your own base lines for the knock sensor so that the aem ems can use it accurately.</TD></TR></TABLE>

Good info. I'll have to go check that out. An AEM EMS may be in my fuutre

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by devnull &raquo;</TD></TR><TR><TD CLASS="quote">I personally like to hook up an amp and head phones to the knock sensor.</TD></TR></TABLE>

...this can get tedious hooking it up vs. having a nice knock meter online all the time, however, it does work for sure.