i have a 99 teg gsr and i was recently taking out the plugs and wires to put new ones in.. when i encountered a problem everyone knows what a set of wires look like well mine when u pull them out instead of coming all the way out the top piece just poped off leaving the long plastic tube and the rubber bushing down inside unable for me to reach with anything... i am not shure if anyone has ever heard of anything like this but any help on how to get it out would be great because of now i cant get my plugs out because of the rubber pieces down in there. thanks

 

I guess I'd try to grab it with long-nose pliers. Otherwise, you might have to go buy a pair of sparkplug boot pliers (link).

http://www.harborfreight.com/c...32867

 

thanks for the help i didnt know they made such things

 

or you could try to twist the boot to loosen it from the tip of plug and then pull that out before you spend your money. You could use a needle nose to get down as far as you can and twist at the same time you are pulling up. gl