How hard is it to resleeve...........

Reply Subscribe

Thread Tools

Search this Thread

Dec 21, 2001 | 11:35 AM

Short_Shifter

Thread Starter

Joined: Dec 2001

Posts: 232

Likes: 0

From: Barbados

How hard is it to resleeve...........

I just wanted to know if any know how hard is it to install aftermarket sleeves yourself ?

What tools are needed ?

What do ya have to do ?

Dec 21, 2001 | 11:41 AM

Spade

Honda-Tech Member

Joined: Aug 2001

Posts: 15,369

Likes: 3

From: Redwood City, Ca

Re: How hard is it to resleeve........... (Short_Shifter)

Pull the engine apart is the first thing I know

From there good luck.

Dec 21, 2001 | 12:19 PM

rainforest

Member

Joined: Jul 2001

Posts: 1,940

Likes: 1

From: clearwater, florida, united states

Re: How hard is it to resleeve........... (Short_Shifter)

unless you have good machines and experanice than leave it to a pro. most stuff on car's is easy but resleeving isn't on of them. but don't let that discourge you from building your on motor that's not hard at all.

Dec 21, 2001 | 01:50 PM

boosted3g

Honda-Tech Member

Joined: Jan 2001

Posts: 1,391

Likes: 0

From: Lancaster, PA, USA

Re: How hard is it to resleeve........... (rainforest)

its easy. You jsut put it in a box and sent it to Vince at Golden Eagle. A few weeks later it comes back and its beautiful. There is no other option in my opinion.