Hondata 4 port boost controller
DO IT ON ALL FOURS
Joined: Sep 2007
Posts: 7,632
Likes: 15
From: IN Your Mind
Re: Hondata 4 port boost controller
This should really be in the Forced Induction section. A 4 port has bigger boost range with smaller spring at the cost of resolution. 3 port has smaller range with greater resolution.
People have run 5psi spring with 30+ psi boost on 4 port before. Who cares about the duty cycle? Every setup is different for both psi achievable and duty cycle. Searching this subject will yield better results.
People have run 5psi spring with 30+ psi boost on 4 port before. Who cares about the duty cycle? Every setup is different for both psi achievable and duty cycle. Searching this subject will yield better results.
Thread
Thread Starter
Forum
Replies
Last Post