Higher CR Yields __ upgrades.
Thread Starter
Joined: Jun 2002
Posts: 150
Likes: 0
From: Poquoson, VA, 23662
Higher CR Yields ---upgrades.
Hey all im building a NA D16 (yes, soundsstupid but im doing it none-the-less)
I just got the swap and for my birthday my parents bought me Eagle h-beam rods and JE Pistons, i just bored the block to 75.25 and shoudl be running about 10.5:1 CR right now.
Everything else on the engne is stock. What do i need to upgrade?
I'm getting a set of 2nd gen Turbo DSM injectors (450cc i think) and i was told they should work. Any other upgrades i should get?
I just got the swap and for my birthday my parents bought me Eagle h-beam rods and JE Pistons, i just bored the block to 75.25 and shoudl be running about 10.5:1 CR right now.
Everything else on the engne is stock. What do i need to upgrade?
I'm getting a set of 2nd gen Turbo DSM injectors (450cc i think) and i was told they should work. Any other upgrades i should get?
Honda-Tech Member
Joined: Jan 2003
Posts: 1,074
Likes: 0
From: Brampton, ON, CA
Re: Higher CR Yields ---upgrades. (meams)
I can't think of anything else that would be NECESSARY, but I seriously don't think that a D16 will need the DSM injectors. The stock 240cc injectors will most likely be sufficent for the job.
Thread Starter
Joined: Jun 2002
Posts: 150
Likes: 0
From: Poquoson, VA, 23662
Re: Higher CR Yields ---upgrades. (joe_bocc)
Good i dont really want to spend any more money. Will i need an upgraded fuel pump or a fuel regulator? or a A/F contrller or any of that?
Thread
Thread Starter
Forum
Replies
Last Post
1990_integra_DA9
All Motor / Naturally Aspirated
8
Jun 13, 2008 09:22 PM