HELP! im using an ecu from an automatic in a manuel?
Thread Starter
Honda-Tech Member
Joined: Feb 2008
Posts: 474
Likes: 0
From: munchinoncactus in phx az
HELP! im using an ecu from an automatic in a manuel?
im trying to use an automatic transmission p06 for my manuel ls vtec swap. do i need to do something to the ecu so make it a manuel ecu or what? HELP!
Honda-Tech Member
Joined: Mar 2007
Posts: 11,399
Likes: 69
From: East Coast 506, Canada
Re: HELP! im using an ecu from an automatic in a manuel? (93egboosted)
You can convert your auto P06 to manual. I do them all the time. As for the rest of your swap as long as you followed a good Auto to manual swap thread. I'm not 100% on what harness you guys use to do the swaps. Seems like swapping a full harness just to get rid of a few ATM/ TCU & ECU wires would be a lot of work.
Are you familiar with soldering?
Modified by GhostAccord at 10:46 PM 5/23/2008
Are you familiar with soldering?
Modified by GhostAccord at 10:46 PM 5/23/2008
Thread Starter
Honda-Tech Member
Joined: Feb 2008
Posts: 474
Likes: 0
From: munchinoncactus in phx az
Re: HELP! im using an ecu from an automatic in a manuel? (GhostAccord)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by GhostAccord »</TD></TR><TR><TD CLASS="quote">You can convert your auto P06 to manual. I do them all the time. As for the rest of your swap as long as you followed a good Auto to manual swap thread. I'm not 100% on what harness you guys use to do the swaps. Seems like swapping a full harness just to get rid of a few ATM/ TCU & ECU wires would be a lot of work.
Are you familiar with soldering?
Modified by GhostAccord at 10:46 PM 5/23/2008</TD></TR></TABLE>
yea i can solder
Are you familiar with soldering?
Modified by GhostAccord at 10:46 PM 5/23/2008</TD></TR></TABLE>
yea i can solder
Thread Starter
Honda-Tech Member
Joined: Feb 2008
Posts: 474
Likes: 0
From: munchinoncactus in phx az
Re: HELP! im using an ecu from an automatic in a manuel? (GhostAccord)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by GhostAccord »</TD></TR><TR><TD CLASS="quote">You can convert your auto P06 to manual. I do them all the time. As for the rest of your swap as long as you followed a good Auto to manual swap thread. I'm not 100% on what harness you guys use to do the swaps. Seems like swapping a full harness just to get rid of a few ATM/ TCU & ECU wires would be a lot of work.
Are you familiar with soldering?
Modified by GhostAccord at 10:46 PM 5/23/2008</TD></TR></TABLE>
so when u convert the ecu to manuel what do u do? can u give me a link so i can give it to my buddy doing the ecu. or explain how to do it
Are you familiar with soldering?
Modified by GhostAccord at 10:46 PM 5/23/2008</TD></TR></TABLE>
so when u convert the ecu to manuel what do u do? can u give me a link so i can give it to my buddy doing the ecu. or explain how to do it
Honda-Tech Member
Joined: Mar 2007
Posts: 11,399
Likes: 69
From: East Coast 506, Canada
Re: HELP! im using an ecu from an automatic in a manuel? (tealsvteceg)
If you have a buddy that chips ECU's he probably already knows what resistors to remove and what to jump.
If not it's a pretty simple mod. Here is what he needs to do,
Remove the resistor @ RP17
Replace the resistor @ RP18 with a jumper wire.
Here is a link with pics
http://www.getglitched.com/pgm....html
If not it's a pretty simple mod. Here is what he needs to do,
Remove the resistor @ RP17
Replace the resistor @ RP18 with a jumper wire.
Here is a link with pics
http://www.getglitched.com/pgm....html
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
javifunksEK
Honda Civic / Del Sol (1992 - 2000)
15
Jun 18, 2010 11:03 PM
