Which Header to use on LS/VTEC...
Thread Starter
Junior Member
Joined: Mar 2001
Posts: 607
Likes: 0
From: Phoenix, AZ, usa
Which Header to use on LS/VTEC...
WIll a header designed for the LS fit the LS/VTEC combo OK or should I get the GSR header?
I plan on only taking the engine to 8K RPM so the shorter length of the GSR header isn't really necessary.
I plan on only taking the engine to 8K RPM so the shorter length of the GSR header isn't really necessary.
Honda-Tech Member
Joined: Dec 2001
Posts: 5,418
Likes: 5
From: Gresham, Oregon, USA
Re: Which Header to use on LS/VTEC... (fastbrakes)
Just get it for an LS, it's a whole bunch easier then having to have an O2 sensor port welded into a GSR header. If you wanna spend a little more i would recommend the JDM ITR header.
[Modified by JDMspecEG6, 9:51 PM 4/3/2002]
[Modified by JDMspecEG6, 9:51 PM 4/3/2002]
Honda-Tech Member
Joined: Apr 2000
Posts: 8,757
Likes: 0
From: WI
Re: Which Header to use on LS/VTEC... (fastbrakes)
the lengths of theprimaries and secondaries on both headers are the same.
The ls has a longer collector pipe with an o2 bung in it due to differences in the
exhaust and catalyst. What header you get would depend on what car and
exhaust setup you have.
The ls has a longer collector pipe with an o2 bung in it due to differences in the
exhaust and catalyst. What header you get would depend on what car and
exhaust setup you have.
Thread
Thread Starter
Forum
Replies
Last Post
jamessh1
Acura Integra
17
May 13, 2003 10:35 PM
