Head back on, and some problems...
07-18-2004, 01:50 PM
#1
Junior Member
Thread Starter
Join Date: Dec 2003
Location: I had 1000 posts, Ohio, 45805
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
Head back on, and some problems...
I just got my head back from the machine shop...got it milled .020" hot tanked and glass beaded and port matched...also got a 3 angle valve job, and crower 403 cams and dual springs and retainers...all new gasket set from the head gasket up...i have a FPR and guage and ram air intake, header, free flow cat, and cat back exhaust...also installed the SAFC...
so my problem is i have white smoke...pretty thick, but not crazy...not blue, not sweet smelling? is this normal for a freshly built head? im not losing oil or coolant...and i played around with my FPR to see if i was running to rich or lean...and it didnt help...so i guess its not a fuel problem? help me please tho
so my problem is i have white smoke...pretty thick, but not crazy...not blue, not sweet smelling? is this normal for a freshly built head? im not losing oil or coolant...and i played around with my FPR to see if i was running to rich or lean...and it didnt help...so i guess its not a fuel problem? help me please tho
07-19-2004, 03:39 AM
#6
Honda-Tech Member
Join Date: Dec 2003
Location: Charleston, SC
Posts: 7,383
Likes: 0
Received 0 Likes
on
0 Posts
Re: Head back on, and some problems... (sleepin91teg)
could be valve seals or what I mentioned in your other thread about "your first pics" a few minutes ago
Thread
Thread Starter
Forum
Replies
Last Post
ehrkeith
Honda Civic / Del Sol (1992 - 2000)
10
04-16-2012 05:54 PM
jyacoba2009
Honda Civic / Del Sol (1992 - 2000)
4
11-23-2009 08:25 PM
kKdARIAN
Forced Induction
14
11-04-2003 08:02 AM