hello, im from post falls ,ID. Im 22 and i work at Les Schwab tire center. i work alot and dont have much time to play and when i do i spend it on my car. i have been workin on 2 h22a projects and i would really like some help. i apologize if i did not go about it the right way but would really appreciate any info and help.

i was wondering what sensor is supost to be there and what is it used for and possible were i can get one. im very sorry if i put this on the wrong thread. i just got on because im kinda stumped. i am putting this jdm h22a in my 92 hatch. i dont do much online im more of a guy that just does it and learns from it so any help would be great.




and i think this one is for air pressure sensor right? if wrong plz help its on the back of the intake manifold. should i replace this? and what exactly does this do? thanks again sorry for being dumb.



this is right under the oil filter and i think this is the knock sensor?



and what exactly is this?



well thats all for now i truely am sorry for annoying many of you and would appreciate it for any serious help. my email is atomiclegends@hotmail.com and i have aim atomiclegends and my gf has msn message of moonfrygirl@hotmail.com. If anyone has some pics or some real helpfull tips on this h22a into my 92 hatch that would be great if you could just msg me or e-mail them to me.she also has a myspace and she says its http://www.myspace.com/hondagurly so any help would help out.



Modified by 3ounce at 1:05 PM 1/7/2007

 

1st pic is where the idle air control valve goes, 2nd is the intake air temprature sensor, 3rd id th oil pressure sensor, and 4th is the charcoal canister purge switch.

 

thank you very very much i really appreciate your quick response thx.

 

hey what kind of wheels do you have? u still have 4x100? im tring to find some wheels that i can put on my car and just buy the tires/slicks from work.

 

my car has bogarts front and rear. 4x100 bolt pattern.

 

how wide are they?

 

9 front-3.5 rear

 

ok these are my mounts i was just wondering if anyone knows which one is the back mount or how this is actually supost to fit on my 92 civic? sorry im a nub

 

any ideas? i know i have the tranny support mount but not the top mount. and i know i have the right mount but i cant figure out were that plate goes.