Fuel management on a D16

Reply Subscribe

Thread Tools

Search this Thread

Sep 5, 2002 | 08:40 AM

BorderM3

Thread Starter

Honda-Tech Member

Joined: Jul 2002

Posts: 325

Likes: 0

From: Altoona, PA, USA

Fuel management on a D16

Do you guys think i could get away with stock fuel pump and stock injectors running stock boost on a MHI-TD05H-14b (1st gen mitsu turbo) its like 8lbs stock i believe. If i run a S-AFC.

I have a FMU and dsm 450cc injectors, but i need resistor pack and fuel pump.

Thanks

Sep 5, 2002 | 11:44 AM

CzanSOHC

Joined: Aug 2002

Posts: 1,350

Likes: 0

From: V8 Country, USA

Re: Fuel management on a D16 (BorderM3)

nope, just get teh resitor box or make your own...not that hard...do be cheap....will cost you more in the long run.

Sep 5, 2002 | 11:58 AM

autoEXturbo

Joined: May 2002

Posts: 1,882

Likes: 1

From: FRANK THE TANK, USA

Re: Fuel management on a D16 (BorderM3)

at 8psi your definitely gonna strain your injectors and pump. Hell i knew a guy running 5psi and seized his pump then his motor blew. What i did was get the rc 440's, vortech fmu, something for the map sensor, 255lph fuel pump and a vafc and then pushed it to 8psi. Inlinepro recommended it to me, I did it and the car worked fine.