I've had this Vortech fuel rail for about 4 years and just pulled it out to use it with my new aeromotive fuel pressure regulator and the only thing that I can find out is that I know for a fact that the thread pitch to attach to the fuel rail is a -6AN, as I tried the fittings on both sides.

my question is, what option do I have to attach my fuel line to the fuel rail. I have a 92 acura integra ls. so please help me if you have some options I can look at. I looked at AEM's 2603 or something like that but not sure if that will work for me and what's the difference between 90-93 fuel rail banjo fitting and the 94-01. thanks for reading this, Tony

 

anyone..... Please help me.

 

Get a Steel braide fuel line with AN fittings or I have a banjo to AN fitting but it's a -8 AN. PM me if you want it

 

well I want to try to keep my stock hose and Banjo fitting if all possible. I wouldn't mind that adaptor if it will work. I am near where; if need be, I can get ahold of any earls fitting at Industrial liquidators. they stock them, but I KNOW NOTHING, about Banjo fittings and the different sizes if the bolt will fit the 92 integra banjo then I am interested. I just would need to get a reducer or maybe a banjo that withe the -6an. I don't know,

 

up, anyone

 

I've got the end of my AEM fuel rail that adapts a -6AN o-ring boss to the stock banjo end of the fuel line. It should work just fine to allow you to use the stock fuel line.

 

hell yeah, that's what I was looking for pm'd

 

Funds sent

 

waiting on a response.....................................