EGT readings
Thread Starter
Junior Member
Joined: Nov 2007
Posts: 26
Likes: 0
From: frampton, canada
EGT readings
Hey everyone, i just got my Egt gauge plugged and i want to know what are the normal temperature operation in my FI setup. Bone stock B18b garrett t3t4 57trim...
Honda-Tech Member
Joined: Feb 2003
Posts: 9,820
Likes: 12
From: schooling kids in ny, usa
Re: (cast98integra)
higher than 900 means you are melting your pistons lol, if its celcius that is.
proper placement is in the 3rd cyllinder runner 1 to 2 inches from the head. at that location, idle is around 400c, cruising is in the 600's and boost should hit up around 800. aluminum melts at 900c, so if you see anything close to that take your foot off the gas and either add more fuel or pull some timing
proper placement is in the 3rd cyllinder runner 1 to 2 inches from the head. at that location, idle is around 400c, cruising is in the 600's and boost should hit up around 800. aluminum melts at 900c, so if you see anything close to that take your foot off the gas and either add more fuel or pull some timing
Thread
Thread Starter
Forum
Replies
Last Post
