Just out of curiosity, what do you guys think would be the fastest and sweetest street legal honda/acura setup? Chassis/Motor/Tranny ect...

 

B20VTEC with 8.0:1 CR pistons, titanium sleeved block, boosting 2 bar on a Drag 4 turbo with a wicked suspension setup and drag radials in a CRX.

 

My friend Kenny at http://www.groundzeromotorsports.com He's got a GSR with Golden Eagle sleeves, JE pistons, Crower rods, Portflow head, Rev Hard stage 2C turbo with a straight T04 turbo, a 42.5mm turbo inovation wastegate, controlled by a Blitz SBC boost controller and Hondata 4b. It's in his EK boosting 22psi which made 505whp and 350 torque. He drives it on the street with full boost but there is no traction. Even with his big slicks at the track it spins through third. I would just put that setup in an EG and ur set.

 

Also he has a hybrid LS tranny....

 

I still new to all this turbo stuff, how much is 2bar in psi?

 

one bar is 14.7 PSI, correct me if i'm wrong, so:
2 (bar) X 14.7 PSI=29.4 PSI

 

that tis correct

 

Nah a 2000 black Si wingless, dumped on stock wheels, with ITR motor fully built by spoon for turbo w/Rev Hard T04 turbo, Type R seats and CTR cluster, that would be a badass car

 

fully built h22/h23 with t04E turbo at 12 psi in a 5th gen accord coupe. full tein suspension, black paint with real JDM headlights and corners, smoked tails, CF hood, nicely kitted (not some kit full of holes and vents), dumped on bronze volk gt-c's

that's just a brief rundown, i mean i could sit here and type it down to every last detail, but it would take too damn long.

 

something similar to my car. every civic coupe you see out there has a drop, some wheels, an exhaust and tint. That's what my car looks like. Nice and clean. Now you pop the hood and you have a another story. Fully built gsr block, t4 60-1 ball bearing turbo, and some other toys. Granted i might not push over 500hp yet, but while some others a still trying to get traction, i'm gone. Form and function is how i look at it. 326 to the wheels at 10psi, stock head and fmu setup. Should see 400 with the new injectors going in this week.


[Modified by autoEXturbo, 1:10 PM 11/6/2002]