Ok here is the problem i keep having problems with my passenger side axle popping out. I have replaced the axle 3 times and this isnt it. I noticed when i push the axle up and down it has leeway in the differential. The splines are ok so i dont think thats the messed up part. I took out axle and the peice were the splines go into moves up and down. I was thinking maybe its a bearing or something cause at high rpms(6k-7.5k) i get a bad vibration from the drive train. Also when i got this tranny the shop put a cm stage4 clutch on it and resurfaced my flywheel. What could be the problem do i need a new differential or is it something simpler than that.

 

what engine/transmission is it?and what axles are you using?Ive never heard of that kind of problem..are you making sure the locking ring is on the end of the axle?Maybe an olde ring got stuck in there and isnt letting the old ring grab onto anything...also..make sure the axle is all the way in,not just where it feels like its not going in anymore...it has to be flush and not much gap between the axle and the transmission.

 

Its a h22 engine and tranny. I am using nappa lifetimes. It goes in but the is a litte space between tranny and axle. It has movment though once its in. It has to be pryed out once it goes in. Any other thoughts. The actual housing for the axle to lock into is what moves up and down. Sorry im new to transmissions


Modified by matix at 4:14 AM 5/19/2004

 

no help.....