I am in need of a new ECU for my 92 Civic Si (manual) I believe I need a P28 ECU. Can I use any ECU from 92-95 Si/EX even if it's from an automatic car?

Sorry for the question... but I didn't find it in the search.

 

yes u can. you just need to open up the ecu and modify it.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by GeeSssAre &raquo;</TD></TR><TR><TD CLASS="quote">yes u can. you just need to open up the ecu and modify it.</TD></TR></TABLE>

I guess I now have 2 questions:

Is there a way to tell which is which from the codes on the outside?

How do you modify an auto ecu for a manual?

 

Try here.

https://honda-tech.com/zerothread?id=1171263

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hurricane &raquo;</TD></TR><TR><TD CLASS="quote">Try here.

https://honda-tech.com/zerothread?id=1171263

</TD></TR></TABLE>

Thanks for the link. That gives the info on the change to mt... but unfortunately nothing on how to tell from the outside of the computer if it's for a m/t or a/t. (so I buy the correct one in the first place and not have to solder anything)

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jan in Omaha &raquo;</TD></TR><TR><TD CLASS="quote">

Thanks for the link. That gives the info on the change to mt... but unfortunately nothing on how to tell from the outside of the computer if it's for a m/t or a/t. (so I buy the correct one in the first place and not have to solder anything)</TD></TR></TABLE>

Here's the info I was looking for. (scroll down a little bit to find it)

https://honda-tech.com/zerothread?id=810101