posting this for a friend... got a d16y8 with a spun #4 rod bering, i have a crank from a d16z6. just making sure they are interchangeable. going with eagle rods, and je pistons for FI setup, any input appreciated thx.

 

ttt

 

come on guys, alot of money being invested here, just need to confirm thanks for any input ttt

 

last time ttt

 

Well I don't have a definante answer...but you can use one of those rulers that has the two arms on it....I can't remember the name, but I think there called a something gauge. Looks like this

=======
```\|```|/
___^------- this part moves back and forth

Anyways get the diameter of the main journals and the rod journals and see if there the same dimensions.


[Modified by Westrock2000, 2:32 AM 9/7/2002]

 

plastiguage?

 

its called a calliper
it is used for measuring od and id

 

well i think i'll just take both cranks to the machine shop with the block, i'll have him check them out by the way isn't it a micrometer what you were speaking of? thanks for you posts guys

 

Same.