Okay so I ordered a head set (gaskets, seals and all to rebuild my head.... B18C1) Anway without measuring the size of head gaskets and all I take the valve seals out and give it to the machine shop to rebuild my head.

The rebuild is finish and I take the head home.

I remove the head gasket and notice this thing is about 1" in a half smaller than the B18C1 head so I figrue they sent me a frickin civic head.

Im worried because are the valve seals all the same in the hondas? I mean the machine shop didn't tell me there was a problem when I picked it up, like the seals were too small or anything.......... so I am assuming they (valve seals) are the same right?? If the shop installed them they would've known if they didn't fit and tell me right..........very concernec now.

Thanks for any help.