JDMDC4life

I'm Currently working on rebuilding my D16a6 Motor in my CRX. I have a shop that is going to do a valve job, deck the head, hot tank it, an assemble it. My friend is helping me out with the engine build (I have never built and engine before). The current plan is to replace the valve seals and put it back together with some new head studs. Is there anything else I need to replace in the head itself or is doing the seals alone enough?

v4lu3s

have them check the valve guides and valves for proper clearance sicne teh age of the head they may be worn out of spec.

KevinEF7

Having the valve guide clearance checked aswell as valve straightness would definitely be recommended