CV Boot, Driveaxle busted due to rotors installation?
Thread Starter
Joined: Nov 2001
Posts: 1,150
Likes: 0
From: Pandemonium
CV Boot, Driveaxle busted due to rotors installation?
Hi guys,
I had my dimple drilled rotors installed at a Muffler/Brake shop on Monday (2 days after the sht happened to my car) and now I'm noticing like this greyish thick gooey fluid around the CV joint (the round thing??) could it be due to the installation of the rotors?
To get my rotors out they had to use one of the puller thing that sticks itself to the rotors and pull real hard...what do you guys think?
I had my dimple drilled rotors installed at a Muffler/Brake shop on Monday (2 days after the sht happened to my car) and now I'm noticing like this greyish thick gooey fluid around the CV joint (the round thing??) could it be due to the installation of the rotors?
To get my rotors out they had to use one of the puller thing that sticks itself to the rotors and pull real hard...what do you guys think?
Thread Starter
Joined: Nov 2001
Posts: 1,150
Likes: 0
From: Pandemonium
Re: CV Boot, Driveaxle busted due to rotors installation? (iwhichisme)
took it to a shop, they said something about axle lining or something else "cracked"?? 
weird...would cost $140 to replace both. doh
weird...would cost $140 to replace both. doh
Junior Member
Joined: May 2002
Posts: 994
Likes: 0
From: houston, tx
Re: CV Boot, Driveaxle busted due to rotors installation? (sloaccord96)
wow only 140 for BOTH? it cost me 230 a boot to get mine replaced. yes, i got ripped off, comes with the economy in the area.
Thread
Thread Starter
Forum
Replies
Last Post
Rust
Honda Civic / Del Sol (1992 - 2000)
4
Mar 8, 2004 04:54 PM
88whitehf
Honda CRX / EF Civic (1988 - 1991)
5
Dec 30, 2002 05:57 PM