compression testing procedure info needed
want to perform a compression test on my DOHC ZC in my '91 Civic,
as it is currently running on three cylinders. From what I understand,
I have to disable the fuel pump and possibly open the throttle body
butterfly all the way. Is this correct? If so, is the best way to disable
the fuel pump by removing a fuse? And does the butterfly have to be
opened fully?
any info appreciated
greg v
as it is currently running on three cylinders. From what I understand,
I have to disable the fuel pump and possibly open the throttle body
butterfly all the way. Is this correct? If so, is the best way to disable
the fuel pump by removing a fuse? And does the butterfly have to be
opened fully?
any info appreciated
greg v
-take out ecu fuse or unplug (kills the fuel pump and igniton).....
-extra step i take unplug the dist plugs...
-take out all sprak plugs and wires
-hold throttle wide open
-crank over at lest 5 times
the readings should be with in 10% of each other ,hope that helps ya.......
-extra step i take unplug the dist plugs...
-take out all sprak plugs and wires
-hold throttle wide open
-crank over at lest 5 times
the readings should be with in 10% of each other ,hope that helps ya.......
Thread
Thread Starter
Forum
Replies
Last Post
Aphelion
Honda Civic / Del Sol (1992 - 2000)
1
Feb 13, 2005 10:14 PM
gregv
Honda CRX / EF Civic (1988 - 1991)
1
Feb 15, 2004 12:04 AM



