hey my 90 Crx is throwing 2 codes. code 20 and code 6. i know that code 20 is electronic load device but dont know what a code 6 is. also how would i go about fixing both of these. please help. thank you
-Kyle

 

anyone know what a should check? its been throwing the codes since i installed it

 

TTT

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by No_PassWorD &raquo;</TD></TR><TR><TD CLASS="quote">anyone know what a should check? its been throwing the codes since i installed it</TD></TR></TABLE>

Installed what?

 

the motor =P sorry i guess i left out an important part =P hahaha but ya any input is good input.... well unless u just bash.

 

 

Code 6 is for ECT (Engine Coolant Temp Sensor).

Check for loose connection at the sensor. If thats good, Id replace it with a known good ECT sensor.

 

where is it located? and what about the ELD sensor or whatever?

 

ELD sensor is built into the fuse box. ECT sensor is located on the head around the water neck area. Should only have one wire going to it.

 

thank you so much. i will check it out tomaro.
-Kyle

 

no prob.