Ok so I was leaving work last night, I pushed in clutch to start the car, I go to put it in reverse and it won't go into gear. Pedal is now dead. Looked in master cyl reservoir and it was empty. So I put some more fluid in and start manually pumping the pedal. Now there's a spot underneath the slave cyl with fluid. Can anyone help me here? Is it the slave cyl? Just a line leaking? Tyia!

 

Hard to say if it is the SC or the line, wipe away all fluids, [clean] and see exactly where it's coming from. 94

 

Wiped down its def coming from slave cyl. Is best course of action just replace sc and go from there?

 

pull back the boot on the slave cylinder and look for a leak there...just for the hell of it check the master cylinder push rod behind the clutch pedal and see if it's leaking at that push rod..if so, replace both if both are leaking...best to do em both at the same time...don't buy auto parts stores brand master cylinders they all sell junk and will leak at the push rod almost immediately...either go honda oem or buy ac delco or something trustworthy