CEL 03 manifold absolute pressure help
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2003
Location: nunya, GAHdamnBusiness, ethiopia
Posts: 4,707
Likes: 0
Received 0 Likes
on
0 Posts
CEL 03 manifold absolute pressure help
ok I've switched the map sensor twice and i keep getting the same code.
I've had the same code twice now and both times the car would shutoff before getting the code. The first time i was just driving casually making a turn. The second time was when i was driving in the neighborhood last night.
Another thing that happened was when i would give it gas it would cut off and then catch back on again, i could feel it in my pedals. could it be that i have something clogged. maybe a fuel filter?
this is in an 95 accord with a 93 h22. mods are: dc headers, carsound hi flow cat, dunk catback exhaust piping, no exhaust..(for now). any suggestions?
I've had the same code twice now and both times the car would shutoff before getting the code. The first time i was just driving casually making a turn. The second time was when i was driving in the neighborhood last night.
Another thing that happened was when i would give it gas it would cut off and then catch back on again, i could feel it in my pedals. could it be that i have something clogged. maybe a fuel filter?
this is in an 95 accord with a 93 h22. mods are: dc headers, carsound hi flow cat, dunk catback exhaust piping, no exhaust..(for now). any suggestions?
#2
Honda-Tech Member
Thread Starter
Join Date: Sep 2003
Location: nunya, GAHdamnBusiness, ethiopia
Posts: 4,707
Likes: 0
Received 0 Likes
on
0 Posts
update... happened again today after driving a good 30 minutes.... once again the car shutdown once we hit traffic.... i started it back up and got CEL... after that the gas started to seize up.
any help???
i will check the CEL right now...
any help???
i will check the CEL right now...
#3
Honda-Tech Member
Join Date: Jan 2003
Location: Charlotte, NC
Posts: 3,788
Likes: 0
Received 0 Likes
on
0 Posts
Re: (gaydm.accord)
check for corrsion in the conector or check to make sure the pins are all the way in the connector and not loose. do you have a v-afc?
#4
Honda-Tech Member
Thread Starter
Join Date: Sep 2003
Location: nunya, GAHdamnBusiness, ethiopia
Posts: 4,707
Likes: 0
Received 0 Likes
on
0 Posts
i have fields.. the connections to the battery are good i just washed them and cleaned them with water and baking soda no corrosion. the pins are all intact, and the wires to the fields are still good.
#6
Honda-Tech Member
Thread Starter
Join Date: Sep 2003
Location: nunya, GAHdamnBusiness, ethiopia
Posts: 4,707
Likes: 0
Received 0 Likes
on
0 Posts
Re: (eLusive ek4)
to my knowledge it does not... thats what the diagram says. im gettin gthe same code 03 got it again today arghh..
Thread
Thread Starter
Forum
Replies
Last Post
ventura77
Honda Civic / Del Sol (1992 - 2000)
3
01-17-2005 02:02 PM