car won't brake!!!
Thread Starter
Joined: Apr 2006
Posts: 71
Likes: 0
From: sacramento, ca, united states
car won't brake!!!
i have a 95 honda civic ex with anit brakes. i was driving home today and my brake pedal started acting funny. it went flat against the floor and could barely brake. then went back to normal for a few miles and started acting up again. im thinking is a bad master cylinder but i want to bleed my brakes first to see if that will solve the problem. my question is what is the correct procedures to bleeding the brakes? do you bleed the anti brake unit or individually? please help.
Joined: May 2003
Posts: 8,884
Likes: 0
From: Intelligence plus character
Re: car won't brake!!! (4cylsturbo)
your supposed to start with the brake furthest from teh master cylinder. So the rear right then rear left, then front right and then front left. Damn for some reason now i think its the other way around but im about 95% sure it this way.
Junior Member
Joined: May 2003
Posts: 740
Likes: 0
From: Redstone Motors, Ca, USA
Re: car won't brake!!! (JDM knowledge)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDM knowledge »</TD></TR><TR><TD CLASS="quote">your supposed to start with the brake furthest from teh master cylinder. So the rear right then rear left, then front right and then front left. Damn for some reason now i think its the other way around but im about 95% sure it this way.</TD></TR></TABLE>
Thats the way you normally do it !!
Thats the way you normally do it !!
Thread
Thread Starter
Forum
Replies
Last Post
vtecn8ive
Honda CRX / EF Civic (1988 - 1991)
7
Oct 18, 2008 11:57 PM